Full Rail Guide
• Measuring Tape
• Miter saw with high tooth count carbide blade
• 13/64” drill bit
• #3 Phillips screwdriver bit
• Ratchet set
Installation Videos
• Level
• Rubber Mallet
• Speed Square
• Cordless Drill / Impact driver
• Quick clamp grips
• Pencil
Tri-Rail Design
Installation Guidelines
Secondary Handrail
Column Wraps
• Please read all instructions completely before starting any installation of DekPro™ Prestige Railing Systems.
• SAFETY: Always be safe and follow all instructions when using power tools and always wear eye protection!
• It is the responsibility of the installer to meet all code and safety requirements and to obtain all required
building permits. The deck and railing installer should determine and implement appropriate techniques for
each installation situation. DekPro™ or its distributors shall not be held liable for improper or unsafe installations.
• Proper blocking must be in place before mounting posts. .
• Rail Sections come in nominal 6ft & 8ft lengths. (Actual rail lengths are 70” and 96.75” respectively).
• Residential default finished rail height when using DekPro™ bracket installation jig is 38” and Commercial is 42”.
• Posts are available in RESIDENTIAL (3.0” post w/ flange and 4” Sleeve) and COMMERCIAL (3” post w/ flange
6 Boss channels).
• DekPro™ Prestige Railings should be installed using good building practices in accordance with local building codes
and the installation guidelines. Consult your local building code official and check all code requirements before
installing railings.
• DekPro™ Prestige Railing has been tested by ATI and meets testing standards for IRC and IBC
construction codes AC273. Test report CCRR # 0233.
• For questions contact Absolute Distribution Inc., U.S. national distributor for DekPro™ Prestige
Railing Systems at 800-335-5909 or www.AbsoluteDist.com
Gate Install
Post Install
Lighting Guide
Stair Rail
Level Rail
Tools for Installation
Installation Instructions
Stair Rail
Rod Rail
Level Rail